Wireless Doorbell Electric Driveway Doorbell Motion Sensor Alert Secure System Home Alarm System
- List PriceUS$14.41piece
- Sale PriceUS$14.41piece
- ShippingFree Shipping
110V-240V Wireless Driveway Door Bell Patrol Motion Sensor LED Alert Alarm System Sensor Receiver
Working Voltage of the Receiver: 110V-240V
Working Voltage of the PIR Sensor: 4.5V (3 AAA batteries)
Receiver Switch Setting:
1. Music source: 38 different songs for optional Use the external button "music" to finish.
2. The function of volume adjustment: there are three kinds of volume (high, middle, low) for choice.
3. Adjust sound and silence.
Working Range: Up to 70 meters
Infrared sensing distance: 3-7 meters
Receiver size: about 76x80x33mm / 2.99''x3.15''x1.30''
PIR Sensor size: about 80x59x45mm / 3.15''x2.32''x1.77''
[Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]
Applied for: Home, Office, Shopping Mall, Supermarket, Apartment, etc.
Note: We will send the different plug adapter based on different countries.
Do not place the detector in areas where the wind will move it., also try to keep the detective in a clear path to the receiver, so that you can get optimal performance.
Follow the steps for usage
1, Place the correct batteries in the detector
2, Make sure that the batteries have been put in the proper positions.
3, Mount the detector properly by the front door, window frame , driveway, walk path , backyard or anywhere you need.
4, Then switch on the receiver and adjust the volume to either hi or lo position.
5, Now the remote detective system is operating with the infrared detect technology.
6, Place the receiver in an easy to reach place.
7, When the detector senses motion , the receiver will make an audible sound & the LED light will flash.
8, Please wait for 30 seconds after switching on detective & receiver to activate.
9, Please install both units 3 feet above ground level for optimal performance.
Care & maintenance portion
1, Important: please keep the detector & receiver in sheltered places to avoid contact of both units form water and direct sunlight.
2, When the LED indicator does not go on , the battery power is either low or dead. At that time you should change the batteries.
3, Clean the detective regularly with a damp cloth to avoid blockage of sensor by dirt or any small
4, Try to keep it in areas where it will not get wet. In addition, during heavy storms & snowfalls, it is recommended that unit should be moved indoor or in a safe place.
5, Never attempt take apart the units.
6, When the unit is not in use, take out all batteries; clean both units and store the units in dry , cool place.
7, The device is not a toy and should keep out of reach from children.
1 x Receiver (US Plug)
1 x PIR Sensor
1 x Instruction Manual